Audi Coupe Quattro Time! Slammed, Chopped, and Notched: Zac's 3 months ago   19:34

Hoonigan Project Cars
Scotto may have lost his bet - and gotten frosted tips as a result - but that ain't stopping him from working on his cars to get them all running again. Today's patient: the Audi Coupe Quattro, with possibly the most time-intensive timing belt change we've ever had under our roof.


SUBSCRIBE and FOLLOW
YT Subscribe: https://up-tube.com/channel/HPPDNg0vcOofBBVScVQh9m2D
FB: https://www.facebook.com/TheHoonigans/
IG: instagram.com/thehoonigans

Turn on notifications so you don’t miss out, noob.

https://www.hoonigan.com/

Follow Our Crew:
@brianscotto
@vin_tra
@hertlife
@dangerdan3
@mister_zachary
@baddaddybraddy
@jchase7452
@jofeltolosa
@teaguefleury
@baker_ashley
@nelsonflores__
@nadsynads
@kyletstuart24
@larry_chen_foto
@roncar

Stay fresh with the latest apparel:
https://www.hoonigan.com/featured.html

Music
Dead Rebel Productions -
https://up-tube.com/upvideo/SFJKsoM5mpL
https://up-tube.com/upvideo/8dssJ_HN9JD

Ecks Rey - https://up-tube.com/upvideo/ANYsLT3Wz30

Beatkowski Beats "Reflections" - https://up-tube.com/upvideo/ksEYuWycGED

Comments 777 Comments

Hoonigan Project Cars
What’s Scotto gonna finish first?
Hingle McCringleberry
Scotto can tell me not to make his mistakes all he wants, I’m still going to do it
mmceorange
MORE INFO ON THAT 4000!!
Landry Houston
yeah just shove a screwdriver in the fuckin cylinder that's fine
Alex Masraum
WHY DID WE NEVER HEAR ABOUT THE 4000 YOU SOLD
James Robin
Did you know when your finished working on an Audi your fingers ALWAYS end up tasting like "Salty Sasquatch ButtHole?" WTF? Ya,I know, I thought the same thing you are...How Da Fuq do I confirm this???? So ya....I'm workin on it ? ? ? If any1 has any input, hook me up? ( just remember...a Sasquatch...NOT a Yeti....
Jefte Villasenor
He kind of looks like the guy from daily driven exotics
phoenix Rebel NZ
What about the Rolls-Royce?
Wanderluster
Finish the disco. Damnit
Blake Berry
I like how he still refers to PO even though it's been his for 10 years
ian vader
Good Work Dan!
Bowsette
Does it home??? 🤣⚰️
I think Amy did a great job on the tips 👍
xl xxl
I've had plenty of issues with rusted bolts breaking. Easiest thing is to grind down with a Dremel and turn it into a flat head screw and get that thing outta there. There was enough room to use a Dremel, but only you guys really know how much space there was.
Dustin Zynda
When you are used to the rust and corrosion we prep it before trying to get it out. Start spraying it with penetrating oil and heat it etc. before you attempt to remove it. Now living in the south it's easy to forget about the prep work to be done before removing a bolt.
Matthew Mazzella
Please!!!!!! Show that Audi a lot of Love. Pretty hard to find now. Love it!!!!!😍😍
Brian Howe
WU
Alex Perron
Hey Brian, I know you might not read this, but if you do i have a really important question i want to ask you.. Where can you find/ get an audi AAN/ABY/ADU (or 3b) 2.2 20v turbo engine? i know alot of them where on euro cars (audi q2/q4/q6/s2/s4/s6/rs2) around 92-94 but im not sure where to find one other than copart and ebay motors.. This is a dream swap i want to do on my 240sx hatch.. rn however i am struggling on finding the engine that will be the center of this build
Surfside
Frothy? Gray slop =blown head gasket😂😂😂
Remi Ramos
Shout out to Scotto for taking the tips like a man, working on his carcaine addition, and most of all for blessing us with this sick Wu-Tang soundtrack!
Brian Hawthorne
That green coolant is better than brown pudding from mixing the two coolants.
Add Reply

Slammed, Chopped, and Notched: Zac's Audi Coupe Quattro Time! 3 months ago   11:57

It's more or less a proven fact: hanging around the Donut Garage directly results in lower ride heights, no matter what you drive. In this case, Zac takes his Chevy C10 chopper hauler and gets it real low to the ground with a lowering kit from Belltech - and gets some fresh kicks to finish off the look. We approve.

Special thanks:
@detroitsteelwheel
@belltechsporttrucks
@wilwooddiscbrakes

PARTS LIST:
Belltech Lowering Kit: part#707sp
Currie 73-87crate 9in
Detroit Steel Wheel: Delray 20x9/20x10 (5x5)

Holley Sniper EFI 4150 4bbl Part# 550-516K
SNIPER FUEL TANK SYSTEM PART# 19-154
Sniper EFI HyperSpark Ignition Coil Part# 556-152
Sniper EFI HyperSpark Distributor Part# 565-300
Sniper EFI HyperSpark CD Ignition Box Part# 556-151

SUBSCRIBE and FOLLOW
YT Subscribe: https://up-tube.com/channel/HPPDNg0vcOofBBVScVQh9m2D
FB: https://www.facebook.com/TheHoonigans/
IG: instagram.com/thehoonigans

Turn on notifications so you don’t miss out, noob.

https://www.hoonigan.com/

Follow Our Crew:
@brianscotto
@vin_tra
@hertlife
@dangerdan3
@mister_zachary
@baddaddybraddy
@jchase7452
@joey_baggadonuts
@teaguefleury
@baker_ashley
@nelsonflores__
@nadsynads
@kyletstuart24
@larry_chen_foto
@roncar

Stay fresh with the latest apparel:
https://www.hoonigan.com/featured.html